June 9, 2023

1975 Pontiac Firebird

Featured image for “1975 Pontiac Firebird”

The Pontiac Firebird is an American automobile that was built and produced by Pontiac from the 1967 to 2002 model years. Designed as a pony car to compete with the Ford Mustang, it was introduced on February 23, 1967, five months after GM’s Chevrolet division’s platform-sharing Camaro. This also coincided with the release of the 1967 Mercury Cougar, Ford’s upscales, platform-sharing version of the Mustang.

The name “Firebird” was also previously used by GM for the General Motors Firebird in the 1950s and early 1960s concept cars.

The second-generation debut for the 1970 model year was delayed until February 26, 1970, because of tooling and engineering problems; thus, its popular designation as a 1970 1/2 model, while leftover 1969s were listed in early Pontiac literature without a model-year identification. This generation of Firebirds were available in coupe from only; after the 1969 model year, convertibles were not available until 1989.

Replacing the “Cloe Bottle” styling was a more “swoopy” body style, while still retaining some traditional elements. The top of the rear window line went almost straight down to the lip of the trunk lid. The new design was initially characterized by a large C-pillar, until 1975 when the rear window was enlarged, Originally, the ‘wraparound’ style window that occupied more of the c-pillar was initially supposed to be the design, but problems with the glue and sealing of the rear window led to the flat style window being used until the re-designed body in 1975. This style became the look that was to epitomize the F-body styling for the longest period during the Firebird’s lifetime.

We will be replace the camshaft, adding fluid and tuning up the engine, We will also be repairing a leak in the trunk area.

We have installed new lifters and rods to replace the old worn out ones.

The timing chain has been greased and installed.

We have begun removing the old suspension to replace with brand new.

We have begun installing the new suspension.

We removed the drivers door to repair the door hinges.

The engine work has been complete and we will be doing a test fire.

A new hood popper has been installed.